I have had some issues with over exposed areas on solar images and thought the LUT function might help in lowering the sensitivity at the high end and raising it at the low end. Does anyone have experience in using LUT setup in Flycapture for this purpose? If so, any guidance would be appreciated. Also if there is a better way to handle this issue, please let me know.
Thanks. Eric
Grasshopper3 setup. Using the LUT function in Flycapture
- marktownley
- Librarian
- Posts: 42286
- Joined: Tue Oct 18, 2011 5:27 pm
- Location: Brierley Hills, UK
- Has thanked: 20452 times
- Been thanked: 10255 times
- Contact:
Re: Grasshopper3 setup. Using the LUT function in Flycapture
I wouldn't use flycapture at all, use firecapture and just drop your exposure. It could be the overexposed areas are a result of the tuning being off?
http://brierleyhillsolar.blogspot.co.uk/
Solar images, a collection of all the most up to date live solar data on the web, imaging & processing tutorials - please take a look!
Re: Grasshopper3 setup. Using the LUT function in Flycapture
I installed Firecapture, but it would not connect to the camera. I copied the files over as instructed, but no connection. Any suggestions?
- marktownley
- Librarian
- Posts: 42286
- Joined: Tue Oct 18, 2011 5:27 pm
- Location: Brierley Hills, UK
- Has thanked: 20452 times
- Been thanked: 10255 times
- Contact:
Re: Grasshopper3 setup. Using the LUT function in Flycapture
Did you install the x64 versions of all the software?
http://brierleyhillsolar.blogspot.co.uk/
Solar images, a collection of all the most up to date live solar data on the web, imaging & processing tutorials - please take a look!
- marktownley
- Librarian
- Posts: 42286
- Joined: Tue Oct 18, 2011 5:27 pm
- Location: Brierley Hills, UK
- Has thanked: 20452 times
- Been thanked: 10255 times
- Contact:
Re: Grasshopper3 setup. Using the LUT function in Flycapture
No issue then, sometimes there are conflicts when x32 and x64 versions of software are installed for different things. Might help if you post some pics of the issues you are getting.
http://brierleyhillsolar.blogspot.co.uk/
Solar images, a collection of all the most up to date live solar data on the web, imaging & processing tutorials - please take a look!
Re: Grasshopper3 setup. Using the LUT function in Flycapture
It looks like what I should do is get Firecapture to work with the Grasshopper3.
- marktownley
- Librarian
- Posts: 42286
- Joined: Tue Oct 18, 2011 5:27 pm
- Location: Brierley Hills, UK
- Has thanked: 20452 times
- Been thanked: 10255 times
- Contact:
Re: Grasshopper3 setup. Using the LUT function in Flycapture
Totally agree!
http://brierleyhillsolar.blogspot.co.uk/
Solar images, a collection of all the most up to date live solar data on the web, imaging & processing tutorials - please take a look!