I want higher mag for my DSO, Lunar and H-Alpha work (and whitelight too).
I have:
- 80mm Orion ED f7.5
- 152mm acrho Explore Scientific f6.5
- Quark
- ASI 174mm for Solar and Lunar
- Mallincam DSC10c for DSO
I RARELY do visual anymore. So...
-Should I consider PowerMate or Barlow
-If PowerMate, is there a less expensive alternative?
-2" or 1.25"?
-Paracor
Many thanks,
Jack
PowerMate or Barlow for H-Alpha Video
-
- Almost There...
- Posts: 783
- Joined: Tue Feb 03, 2015 3:44 pm
- Location: Vista, CA
- Has thanked: 141 times
- Been thanked: 240 times
- Contact:
PowerMate or Barlow for H-Alpha Video
Explore Scientific 152mm f6.5 achromat
Aeries D-ERF
Quark Chromosphere f27 native, (f14 when focal reduced)
Mallincam .5x focal reducer (large format)
12nm Filter
ZWO174 (IMX249 chip 5um)
Huge Sense of Adventure Viewing Creation
Aeries D-ERF
Quark Chromosphere f27 native, (f14 when focal reduced)
Mallincam .5x focal reducer (large format)
12nm Filter
ZWO174 (IMX249 chip 5um)
Huge Sense of Adventure Viewing Creation
- rsfoto
- Way More Fun to Share It!!
- Posts: 6241
- Joined: Mon Jun 18, 2012 8:30 pm
- Location: San Luis Potosi, México
- Has thanked: 9581 times
- Been thanked: 5682 times
Re: PowerMate or Barlow for H-Alpha Video
Hi Jack,
Reading your message I asked myself " What is the difference between a Powermate and a Barlow ? " and I found this explanation.
https://www.televue.com/engine/TV3b_pag ... &Tab=_back
So from what I understood, the difference is only for visual and depending of the focal length of the eyepiece.
BTW I have never used a Barlow or Powermate in my life as I use my Canon Telephoto extenders 1.4X or 2.0X, because most of my light cameras are connected to my telescopes via a Canon bayonet.
Reading your message I asked myself " What is the difference between a Powermate and a Barlow ? " and I found this explanation.
https://www.televue.com/engine/TV3b_pag ... &Tab=_back
So from what I understood, the difference is only for visual and depending of the focal length of the eyepiece.
BTW I have never used a Barlow or Powermate in my life as I use my Canon Telephoto extenders 1.4X or 2.0X, because most of my light cameras are connected to my telescopes via a Canon bayonet.
regards Rainer
Observatorio Real de 14
San Luis Potosi Mexico
North 22° West 101°
Observatorio Real de 14
San Luis Potosi Mexico
North 22° West 101°
- marktownley
- Librarian
- Posts: 42426
- Joined: Tue Oct 18, 2011 5:27 pm
- Location: Brierley Hills, UK
- Has thanked: 20628 times
- Been thanked: 10371 times
- Contact:
Re: PowerMate or Barlow for H-Alpha Video
Unless your seeing is ASTRONOMICALLY good, I wouldn't even waste time (and money) with a Quark/174 trying to up the amplification factor up even more. You're just oversampling. You might as well just increase the image size 2x in post processing because you're not going to actually increase resolution...
You can't bend physics!
You can't bend physics!
http://brierleyhillsolar.blogspot.co.uk/
Solar images, a collection of all the most up to date live solar data on the web, imaging & processing tutorials - please take a look!
-
- Almost There...
- Posts: 783
- Joined: Tue Feb 03, 2015 3:44 pm
- Location: Vista, CA
- Has thanked: 141 times
- Been thanked: 240 times
- Contact:
Re: PowerMate or Barlow for H-Alpha Video
Mark and Rainier,
It's the physics and the math which confuses me so I get lost in marketing hype.
I appreciate the insight. If the primary difference is for visual then I can consider I rarely am visual.
If my camera limits me then that's another issue.
I neli3ve it was you , Mark, who turned me on to adding a Barlow to the nose of the Quark to straighten the light path then a focal Reducer on the camera and I did see a boost in contrast so I was wondering if I'm improving DSO viewing if I could also optimize H alpha.
Best,
Jack
It's the physics and the math which confuses me so I get lost in marketing hype.
I appreciate the insight. If the primary difference is for visual then I can consider I rarely am visual.
If my camera limits me then that's another issue.
I neli3ve it was you , Mark, who turned me on to adding a Barlow to the nose of the Quark to straighten the light path then a focal Reducer on the camera and I did see a boost in contrast so I was wondering if I'm improving DSO viewing if I could also optimize H alpha.
Best,
Jack
Explore Scientific 152mm f6.5 achromat
Aeries D-ERF
Quark Chromosphere f27 native, (f14 when focal reduced)
Mallincam .5x focal reducer (large format)
12nm Filter
ZWO174 (IMX249 chip 5um)
Huge Sense of Adventure Viewing Creation
Aeries D-ERF
Quark Chromosphere f27 native, (f14 when focal reduced)
Mallincam .5x focal reducer (large format)
12nm Filter
ZWO174 (IMX249 chip 5um)
Huge Sense of Adventure Viewing Creation
- DeepSolar64
- Way More Fun to Share It!!
- Posts: 18947
- Joined: Thu Sep 05, 2019 12:19 am
- Location: Lowndesville S.C.
- Has thanked: 17721 times
- Been thanked: 16866 times
Re: PowerMate or Barlow for H-Alpha Video
I use a barlow for visual but since you don’t do visual much anymore it’s a moot point.
Lunt 8x32 SUNoculars
Orion 70mm Solar Telescope
Celestron AstroMaster Alt/Az Mount
Meade Coronado SolarMax II 60 DS
Meade Coronado SolarMax II 90 DS
Meade Coronado AZS Alt/Az Mount
Astro-Tech AT72EDII with Altair solar wedge
Celestron NexStar 102GT with Altair solar wedge
Losmandy AZ8 Alt/Az Mount
Sky-Watcher AZGTI Alt-Az GoTo mount
Cameras: ZWO ASI178MM, PGR Grasshopper, PGR Flea
Lunt, Coronado, TeleVue, Orion and Meade eyepieces
Visual Observer
" Way more fun to see it! "
Orion 70mm Solar Telescope
Celestron AstroMaster Alt/Az Mount
Meade Coronado SolarMax II 60 DS
Meade Coronado SolarMax II 90 DS
Meade Coronado AZS Alt/Az Mount
Astro-Tech AT72EDII with Altair solar wedge
Celestron NexStar 102GT with Altair solar wedge
Losmandy AZ8 Alt/Az Mount
Sky-Watcher AZGTI Alt-Az GoTo mount
Cameras: ZWO ASI178MM, PGR Grasshopper, PGR Flea
Lunt, Coronado, TeleVue, Orion and Meade eyepieces
Visual Observer
" Way more fun to see it! "
-
- Ohhhhhh My!
- Posts: 108
- Joined: Mon Dec 28, 2020 1:01 am
- Has thanked: 42 times
- Been thanked: 49 times
Re: PowerMate or Barlow for H-Alpha Video
I start with the wrong equipment to add a Quark for imaging, but it "is what it is"...
You have an 80mm f/7.5 scope and a Quark, so you already have about an f/31 "solution" which is recommended. A "slower" scope (focal ratio) will give only a dimmer image and a "faster" scope would not be ideal for the Quark because it is preferable to receive a parallel beam (or whatever the correct terminology is) - already achieved.
With good seeing conditions, you may see one or two arc seconds of seeing. With the 174, 4.2x included Barlow and the scope you are "pushing things" a bit to resolve 0.7 arc seconds when 1 - 2 arc seconds is suggested for excellent seeing conditions if you try to add in a Barlow to the mix. You would become oversampled e.g. more bits of data than pieces of content (info).
So for both issues, you are already about "optimal" and so there is nothing to be gained from adding a Barlow when imaging. Moving to a situation that is oversampled would simply mean more (unnecessary) storage, slower transfer rates, lower fps, longer processing times, more noise (lower Signal-to-noise ratio - SNR) and absolutely nothing to be gained.
For my own setup with a 178, I should probably think about binning the data 2x2 to compensate for the tiny pixels (178 has almost half the size of the 174 pixels). Ideally, I would also stop my scope down to 80mm from 100mm to get a reasonable focal ratio, but since the focal ratio "thing" for Quarks is just a guide (not an absolute cut-off), I'm told that it should be OK ASIS and trying both options (like binning and not binning, stopping down (vs needing a UV/IR filter that I just stomped up for vs just a piece of cardboard on the front objective) is the way to go.
Simon
You have an 80mm f/7.5 scope and a Quark, so you already have about an f/31 "solution" which is recommended. A "slower" scope (focal ratio) will give only a dimmer image and a "faster" scope would not be ideal for the Quark because it is preferable to receive a parallel beam (or whatever the correct terminology is) - already achieved.
With good seeing conditions, you may see one or two arc seconds of seeing. With the 174, 4.2x included Barlow and the scope you are "pushing things" a bit to resolve 0.7 arc seconds when 1 - 2 arc seconds is suggested for excellent seeing conditions if you try to add in a Barlow to the mix. You would become oversampled e.g. more bits of data than pieces of content (info).
So for both issues, you are already about "optimal" and so there is nothing to be gained from adding a Barlow when imaging. Moving to a situation that is oversampled would simply mean more (unnecessary) storage, slower transfer rates, lower fps, longer processing times, more noise (lower Signal-to-noise ratio - SNR) and absolutely nothing to be gained.
For my own setup with a 178, I should probably think about binning the data 2x2 to compensate for the tiny pixels (178 has almost half the size of the 174 pixels). Ideally, I would also stop my scope down to 80mm from 100mm to get a reasonable focal ratio, but since the focal ratio "thing" for Quarks is just a guide (not an absolute cut-off), I'm told that it should be OK ASIS and trying both options (like binning and not binning, stopping down (vs needing a UV/IR filter that I just stomped up for vs just a piece of cardboard on the front objective) is the way to go.
Simon
Last edited by SimonM on Thu Jan 07, 2021 1:42 am, edited 1 time in total.
-
- Almost There...
- Posts: 783
- Joined: Tue Feb 03, 2015 3:44 pm
- Location: Vista, CA
- Has thanked: 141 times
- Been thanked: 240 times
- Contact:
Re: PowerMate or Barlow for H-Alpha Video
Great and interesting explanation Simon.
I never considered binning the sun since I equate binning with decreasing exposure on do objects.
I never considered binning the sun since I equate binning with decreasing exposure on do objects.
Explore Scientific 152mm f6.5 achromat
Aeries D-ERF
Quark Chromosphere f27 native, (f14 when focal reduced)
Mallincam .5x focal reducer (large format)
12nm Filter
ZWO174 (IMX249 chip 5um)
Huge Sense of Adventure Viewing Creation
Aeries D-ERF
Quark Chromosphere f27 native, (f14 when focal reduced)
Mallincam .5x focal reducer (large format)
12nm Filter
ZWO174 (IMX249 chip 5um)
Huge Sense of Adventure Viewing Creation
-
- Im an EXPERT!
- Posts: 356
- Joined: Tue Jan 26, 2016 1:28 am
- Has thanked: 175 times
- Been thanked: 426 times
Re: PowerMate or Barlow for H-Alpha Video
For the Quark, its 4.2x already magnifies. But you also mention DSO, lunar, and white light, and there presumably a magnifier might help, no?
I assume a simple Barlow would be fine. The Powermate most is useful if either an eyepiece follows (visual) or if a narrowband filter follows.
George
I assume a simple Barlow would be fine. The Powermate most is useful if either an eyepiece follows (visual) or if a narrowband filter follows.
George