Building a basic spectroheliograph
Re: Building a basic spectroheliograph
Tadaaa ! I'm getting better at this !
CaH sun, treated with photoshop thanks to Wah's awesome tutorial (couldn't get ride of the horizontal lines...)
I seriously need to dump my webcam. The resolution is atrocious and even the minimum exposure is too high -> EVERYTHING is overexposed except the CaH and CaK lines.
This is my first "not so bad" picture !
CaH sun, treated with photoshop thanks to Wah's awesome tutorial (couldn't get ride of the horizontal lines...)
I seriously need to dump my webcam. The resolution is atrocious and even the minimum exposure is too high -> EVERYTHING is overexposed except the CaH and CaK lines.
This is my first "not so bad" picture !
- Merlin66
- Librarian
- Posts: 3972
- Joined: Tue Dec 13, 2011 1:23 pm
- Location: Junortoun, Australia
- Has thanked: 174 times
- Been thanked: 619 times
- Contact:
Re: Building a basic spectroheliograph
Taratasy <name?>
Certainly improving!
The horizontal banding must be related to camera artifacts....
Onwards and Upwards.
Certainly improving!
The horizontal banding must be related to camera artifacts....
Onwards and Upwards.
"Astronomical Spectroscopy - The Final Frontier" - to boldly go where few amateurs have gone before
https://groups.io/g/astronomicalspectroscopy
http://astronomicalspectroscopy.com
"Astronomical Spectroscopy for Amateurs" and
"Imaging Sunlight - using a digital spectroheliograph" - Springer
https://groups.io/g/astronomicalspectroscopy
http://astronomicalspectroscopy.com
"Astronomical Spectroscopy for Amateurs" and
"Imaging Sunlight - using a digital spectroheliograph" - Springer
- Montana
- Librarian
- Posts: 34722
- Joined: Mon Oct 17, 2011 5:25 pm
- Location: Cheshire, UK
- Has thanked: 17974 times
- Been thanked: 8906 times
Re: Building a basic spectroheliograph
Many thanks, all of you guys are a great support !
I put the project on standby untill I get my new camera, I can't get anywhere with my current webcam
I put the project on standby untill I get my new camera, I can't get anywhere with my current webcam
-
- Way More Fun to Share It!!
- Posts: 2033
- Joined: Sat Nov 24, 2012 2:33 pm
- Has thanked: 57 times
- Been thanked: 1204 times
-
- Way More Fun to Share It!!
- Posts: 2033
- Joined: Sat Nov 24, 2012 2:33 pm
- Has thanked: 57 times
- Been thanked: 1204 times
Re: Building a basic spectroheliograph
In fact, no.taratasy wrote:I put the project on standby untill I get my new camera
I made some improvement :
- a new holder for the grating, I am very proud of it - a new slit made with cutter blades, more rigid than razor blades -> it makes it easier to set the correct slit width. I didn't tested it yet, it could cause horizontal lignes, I hope not. - a new imaging lens which will better fit the new Zwo ASI 120MM camera. This is a Vivitar 75-205mm F3.8, it will be set around 160mm for a good fit of the sun's heigt on the sensor. I think it will also be nice to visualize a wider portion of the spectrum at 75mm
(yeah still haven't got rid of rubber bands) If the SimSpec excel sheet is right (I'm sure it is) I will achieve a resolving power of 13600 and a dispersion of 0,23Å/pixel (binning on x axis at 2), that's not bad at all for what I hoped to achieve !
I just have one question for the correct slit width :
The pixels are 3.75μm and I need 2 pixels for recording the best signal -> thereby my slit should be 3.75x2 = 7,44μm wide
However I have a reducing factor of 160/200 = 0.8, so the slit gap should be adjusted at 7,44x0,8 = 6μm wide.
Am I correct on this ? 6μm is very tiny
Thanks all !
- Merlin66
- Librarian
- Posts: 3972
- Joined: Tue Dec 13, 2011 1:23 pm
- Location: Junortoun, Australia
- Has thanked: 174 times
- Been thanked: 619 times
- Contact:
Re: Building a basic spectroheliograph
Taratasy,
Your arithmetic is good....but I think you'll end up with a gap closer to 10-15micron...
This will still be OK due to the anamorphic factor.....
You may find pencil sharpener blades (flat side towards telescope) work even better.....
Your arithmetic is good....but I think you'll end up with a gap closer to 10-15micron...
This will still be OK due to the anamorphic factor.....
You may find pencil sharpener blades (flat side towards telescope) work even better.....
"Astronomical Spectroscopy - The Final Frontier" - to boldly go where few amateurs have gone before
https://groups.io/g/astronomicalspectroscopy
http://astronomicalspectroscopy.com
"Astronomical Spectroscopy for Amateurs" and
"Imaging Sunlight - using a digital spectroheliograph" - Springer
https://groups.io/g/astronomicalspectroscopy
http://astronomicalspectroscopy.com
"Astronomical Spectroscopy for Amateurs" and
"Imaging Sunlight - using a digital spectroheliograph" - Springer
Re: Building a basic spectroheliograph
Thanks Merlin !
I downloaded the spreadsheet "SimSpec SHGa.xls" from the yahoo group "Astronomical Spectroscopy for Amateurs".
There is an typo error : cell D29 and D30 are referencing cell G18 (blank), I think it should be cell G17
I downloaded the spreadsheet "SimSpec SHGa.xls" from the yahoo group "Astronomical Spectroscopy for Amateurs".
There is an typo error : cell D29 and D30 are referencing cell G18 (blank), I think it should be cell G17
- Merlin66
- Librarian
- Posts: 3972
- Joined: Tue Dec 13, 2011 1:23 pm
- Location: Junortoun, Australia
- Has thanked: 174 times
- Been thanked: 619 times
- Contact:
Re: Building a basic spectroheliograph
Whoooops,
You are correct!
I'll amend and update.
Thanks.
You are correct!
I'll amend and update.
Thanks.
"Astronomical Spectroscopy - The Final Frontier" - to boldly go where few amateurs have gone before
https://groups.io/g/astronomicalspectroscopy
http://astronomicalspectroscopy.com
"Astronomical Spectroscopy for Amateurs" and
"Imaging Sunlight - using a digital spectroheliograph" - Springer
https://groups.io/g/astronomicalspectroscopy
http://astronomicalspectroscopy.com
"Astronomical Spectroscopy for Amateurs" and
"Imaging Sunlight - using a digital spectroheliograph" - Springer
Re: Building a basic spectroheliograph
Welp, I am having problems.
My construction is definetly too poor for correct imaging.
The component can't be aligned correctly, focusing is really difficult to achieve, the camera can't fit tightly to the imaging lens, the whole setup is too heavy for my mount, it shack during acquisition, I got fringe patern on the AVI... and more and more frustration.
A total mess.
I need to reconstruct my SHG in a solid and efficient way, I got some ideas and the motivation.
However I won't be able to do it before next summer (I go back to studies), the project is now definetly in standby.
My construction is definetly too poor for correct imaging.
The component can't be aligned correctly, focusing is really difficult to achieve, the camera can't fit tightly to the imaging lens, the whole setup is too heavy for my mount, it shack during acquisition, I got fringe patern on the AVI... and more and more frustration.
A total mess.
I need to reconstruct my SHG in a solid and efficient way, I got some ideas and the motivation.
However I won't be able to do it before next summer (I go back to studies), the project is now definetly in standby.
-
- Way More Fun to Share It!!
- Posts: 2033
- Joined: Sat Nov 24, 2012 2:33 pm
- Has thanked: 57 times
- Been thanked: 1204 times
Re: Building a basic spectroheliograph
It was something I expected when I first decided to build a SHG. I lacked proper tools and materials, plus it was the first time I built something "complicated".
When I wrote my previous comment I was a little bit frustrated by the amount of time it takes for me to set everything right and take a picture, it is not so bad as I said.
I'm a still very happy to have been able to take a few shot of the sun
btw here the best picture I could get of the sun. It is not bad at all, it is just very difficult and time consuming to get this result with my SHG so I prefer stop and rebuild the thing later in order to get the SHG easier and less frustrating to setup and use
When I wrote my previous comment I was a little bit frustrated by the amount of time it takes for me to set everything right and take a picture, it is not so bad as I said.
I'm a still very happy to have been able to take a few shot of the sun
btw here the best picture I could get of the sun. It is not bad at all, it is just very difficult and time consuming to get this result with my SHG so I prefer stop and rebuild the thing later in order to get the SHG easier and less frustrating to setup and use
-
- Way More Fun to Share It!!
- Posts: 2033
- Joined: Sat Nov 24, 2012 2:33 pm
- Has thanked: 57 times
- Been thanked: 1204 times
Re: Building a basic spectroheliograph
image focus is good - not sure how you got that split image did you bump it or wind gust
Re: Building a basic spectroheliograph
It is caused by dropped frames.
The two parallele dark lines are caused by the slit but they normaly should be horizontal. Here they appear tilted because the optical train disalign itself during the capture...
The two parallele dark lines are caused by the slit but they normaly should be horizontal. Here they appear tilted because the optical train disalign itself during the capture...
- Merlin66
- Librarian
- Posts: 3972
- Joined: Tue Dec 13, 2011 1:23 pm
- Location: Junortoun, Australia
- Has thanked: 174 times
- Been thanked: 619 times
- Contact:
Re: Building a basic spectroheliograph
Taratasy,
Don't be to hard on yourself...
You have managed to assemble a great "proof of concept" SHG and obtained your first spectroheliograms. Well done!
This experience will help you to understand the critical aspects of the SHG design and allow you to better appreciate the accuracy and rigidity required for ongoing success.
You've travelled a good way down the path, your next SHG I'm sure will be much better.
Onwards and Upwards
Don't be to hard on yourself...
You have managed to assemble a great "proof of concept" SHG and obtained your first spectroheliograms. Well done!
This experience will help you to understand the critical aspects of the SHG design and allow you to better appreciate the accuracy and rigidity required for ongoing success.
You've travelled a good way down the path, your next SHG I'm sure will be much better.
Onwards and Upwards
"Astronomical Spectroscopy - The Final Frontier" - to boldly go where few amateurs have gone before
https://groups.io/g/astronomicalspectroscopy
http://astronomicalspectroscopy.com
"Astronomical Spectroscopy for Amateurs" and
"Imaging Sunlight - using a digital spectroheliograph" - Springer
https://groups.io/g/astronomicalspectroscopy
http://astronomicalspectroscopy.com
"Astronomical Spectroscopy for Amateurs" and
"Imaging Sunlight - using a digital spectroheliograph" - Springer
-
- Way More Fun to Share It!!
- Posts: 2033
- Joined: Sat Nov 24, 2012 2:33 pm
- Has thanked: 57 times
- Been thanked: 1204 times
Re: Building a basic spectroheliograph
you are at a more advanced point then I was at same point in time (based on your post)
it took me a long time to get decent images
I still suck at post image processing
I plan to spend more time at this in my retirement
and with chapter 8 in Ken's book
it took me a long time to get decent images
I still suck at post image processing
I plan to spend more time at this in my retirement
and with chapter 8 in Ken's book
Re: Building a basic spectroheliograph
Hi Guys, It has been a long time!
Since last time I completely stopped my SHG project because of a lack of time (end of holidays, had to go back to study) and lack of motivation, I must admit.
Now, I still don't have much time, but I want to try again and build a new SHG (the old one was too wonky, I dumped it). I still have my diffraction grating, the telescope, collimator, and I recently got the famous adjustable optic slit from SupluShed! Now I just need to put everything together in a non-wonky way
You will hear from me in the coming months.
Since last time I completely stopped my SHG project because of a lack of time (end of holidays, had to go back to study) and lack of motivation, I must admit.
Now, I still don't have much time, but I want to try again and build a new SHG (the old one was too wonky, I dumped it). I still have my diffraction grating, the telescope, collimator, and I recently got the famous adjustable optic slit from SupluShed! Now I just need to put everything together in a non-wonky way
You will hear from me in the coming months.
Re: Building a basic spectroheliograph
Hi Merlin66,
In your book, chapter 7 page 132, you write that the "Small Refractor Classical Spectrograph" would achieve "a dispersion of 0.15 Å/pixel, a resolution (at Hα −6563 Å) of 0.61 Å (R = 10800) and a wavelength coverage of 244 Å.".
With:
- Telescope—80 mm, 400 mm focal length, f5
- Collimator—50 mm, 180 mm focal length, working at f5
- Entrance Slit—15–20 μm gap, 6 mm long
- Grating—50 × 50 mm, blazed 5000 Å, 1800 L/mm reflective grating
- Total angle between collimator and imaging lens = 35°
- Imaging lens—50 mm, 150 mm focal length, working at f3
- Imaging camera—Webcam/DMK21, 5.6 μm pixel, 480×640 array, 2.8×3.7 mm chip.
However, when I use the SHG spreadsheet (July 16 revision) and enter the configuration above I get a different result:
- Dispersion (r): 0.39 Å/ pixel
- Resolving power (R) : 8460
- Spectral resolution (at 6563 Å): 0.78Å
- Wavelength range 93Å
Am I doing something wrong or is the spreadsheet working differently now?
In your book, chapter 7 page 132, you write that the "Small Refractor Classical Spectrograph" would achieve "a dispersion of 0.15 Å/pixel, a resolution (at Hα −6563 Å) of 0.61 Å (R = 10800) and a wavelength coverage of 244 Å.".
With:
- Telescope—80 mm, 400 mm focal length, f5
- Collimator—50 mm, 180 mm focal length, working at f5
- Entrance Slit—15–20 μm gap, 6 mm long
- Grating—50 × 50 mm, blazed 5000 Å, 1800 L/mm reflective grating
- Total angle between collimator and imaging lens = 35°
- Imaging lens—50 mm, 150 mm focal length, working at f3
- Imaging camera—Webcam/DMK21, 5.6 μm pixel, 480×640 array, 2.8×3.7 mm chip.
However, when I use the SHG spreadsheet (July 16 revision) and enter the configuration above I get a different result:
- Dispersion (r): 0.39 Å/ pixel
- Resolving power (R) : 8460
- Spectral resolution (at 6563 Å): 0.78Å
- Wavelength range 93Å
Am I doing something wrong or is the spreadsheet working differently now?
- Merlin66
- Librarian
- Posts: 3972
- Joined: Tue Dec 13, 2011 1:23 pm
- Location: Junortoun, Australia
- Has thanked: 174 times
- Been thanked: 619 times
- Contact:
Re: Building a basic spectroheliograph
Hmmmm
OK double checking, the answer you achieved seems to be correct.....I note you have selected x2 binning. Without this option the R value increases dramatically, from R=8460 to R=16921
I think I've found where the differences have crept in...During evaluation I varied the cameras and the results shown/obtained were with a DMK51 and x2 binning.
Sorry for the confusion-hope this helps.
OK double checking, the answer you achieved seems to be correct.....I note you have selected x2 binning. Without this option the R value increases dramatically, from R=8460 to R=16921
I think I've found where the differences have crept in...During evaluation I varied the cameras and the results shown/obtained were with a DMK51 and x2 binning.
Sorry for the confusion-hope this helps.
"Astronomical Spectroscopy - The Final Frontier" - to boldly go where few amateurs have gone before
https://groups.io/g/astronomicalspectroscopy
http://astronomicalspectroscopy.com
"Astronomical Spectroscopy for Amateurs" and
"Imaging Sunlight - using a digital spectroheliograph" - Springer
https://groups.io/g/astronomicalspectroscopy
http://astronomicalspectroscopy.com
"Astronomical Spectroscopy for Amateurs" and
"Imaging Sunlight - using a digital spectroheliograph" - Springer
Re: Building a basic spectroheliograph
So, I played a while with the SHG spreadsheet and I found out a good design for my new SHG. It will have a classical design using camera lens, greatly inspired by Chagnard's work.
The different parts are:
Telescope: a 50mm f/10 lens, fited in a PVC tube
Slit: the one from Surplus Shed
Collimator: 200mm f/5.6 Tele-Takumar lens
Grating: 25x25 1800 lines/mm
Camera lens: 200mm f/3.5 Vivitar lens
Camera: ZWO asi120mm-s
I should get a resolving power of 18000, a spectral resolution of 0.37A and the solar height will fit just right (102%)!
Now I need to find out how I will fit the optical elements on a plywood base and how to correctly align them.
I already found a way to fit the slit on the Tele-Takumar lens cap:
The different parts are:
Telescope: a 50mm f/10 lens, fited in a PVC tube
Slit: the one from Surplus Shed
Collimator: 200mm f/5.6 Tele-Takumar lens
Grating: 25x25 1800 lines/mm
Camera lens: 200mm f/3.5 Vivitar lens
Camera: ZWO asi120mm-s
I should get a resolving power of 18000, a spectral resolution of 0.37A and the solar height will fit just right (102%)!
Now I need to find out how I will fit the optical elements on a plywood base and how to correctly align them.
I already found a way to fit the slit on the Tele-Takumar lens cap:
Last edited by taratasy on Wed Aug 23, 2017 11:59 pm, edited 2 times in total.
- Merlin66
- Librarian
- Posts: 3972
- Joined: Tue Dec 13, 2011 1:23 pm
- Location: Junortoun, Australia
- Has thanked: 174 times
- Been thanked: 619 times
- Contact:
Re: Building a basic spectroheliograph
Looking promising....
The slit assembly needs to be reversed - the flat side of the slit should face the incoming beam from the telescope.
(I remove the four small screws and use the larger "adaptor" on the other side. Hope that makes sense)
The slit assembly needs to be reversed - the flat side of the slit should face the incoming beam from the telescope.
(I remove the four small screws and use the larger "adaptor" on the other side. Hope that makes sense)
"Astronomical Spectroscopy - The Final Frontier" - to boldly go where few amateurs have gone before
https://groups.io/g/astronomicalspectroscopy
http://astronomicalspectroscopy.com
"Astronomical Spectroscopy for Amateurs" and
"Imaging Sunlight - using a digital spectroheliograph" - Springer
https://groups.io/g/astronomicalspectroscopy
http://astronomicalspectroscopy.com
"Astronomical Spectroscopy for Amateurs" and
"Imaging Sunlight - using a digital spectroheliograph" - Springer
Re: Building a basic spectroheliograph
Oh, the flat side is already facing the incoming beam from the telescope.
- Merlin66
- Librarian
- Posts: 3972
- Joined: Tue Dec 13, 2011 1:23 pm
- Location: Junortoun, Australia
- Has thanked: 174 times
- Been thanked: 619 times
- Contact:
Re: Building a basic spectroheliograph
Ah....
I mis read your message....
I mis read your message....
"Astronomical Spectroscopy - The Final Frontier" - to boldly go where few amateurs have gone before
https://groups.io/g/astronomicalspectroscopy
http://astronomicalspectroscopy.com
"Astronomical Spectroscopy for Amateurs" and
"Imaging Sunlight - using a digital spectroheliograph" - Springer
https://groups.io/g/astronomicalspectroscopy
http://astronomicalspectroscopy.com
"Astronomical Spectroscopy for Amateurs" and
"Imaging Sunlight - using a digital spectroheliograph" - Springer