DIY Solar Scintillation Seeing Monitor with FC support

Frankenscope? Let's see it!***be advised that NOTHING in this forum has been safety tested and you are reading and using these posts at your own peril. blah, blah, blah... dont mess around with your eyesight when it comes to solar astronomy. Use appropriate filtration at all times...
User avatar
rsfoto
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 6124
Joined: Mon Jun 18, 2012 8:30 pm
Location: San Luis Potosi, México
Has thanked: 9243 times
Been thanked: 5504 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by rsfoto »

Hi,

I have to start all over again as it looks like I fried my LMC6484 due to improper measuring while the Arduino was running. The values from yesterday where too low and so I tested the circuit which I still had on my breadboard and they looked much more logical.

Also the idea of the 3 capacitors un paralel was not good. I finally got my 3.3 uF capacitors and exchanged and it stabilized.

Well I still have holidays and so no problem. At least I have something to do.

saludos


regards Rainer

Observatorio Real de 14
San Luis Potosi Mexico

North 22° West 101°
User avatar
PDB
Almost There...
Almost There...
Posts: 702
Joined: Mon Aug 15, 2016 4:23 pm
Location: Belgium
Has thanked: 2 times
Been thanked: 149 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by PDB »

Ooops, can happen. Few months ago i fried a nano Arduino in my focus controller while doing some modifications.

regards,

Paul


User avatar
rsfoto
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 6124
Joined: Mon Jun 18, 2012 8:30 pm
Location: San Luis Potosi, México
Has thanked: 9243 times
Been thanked: 5504 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by rsfoto »

Hi,

Yes, " Sh...t happens " and I should have used a socket instead of Hot soldering the LMC6484 onto the board

Well makes me have more experience for the future :seesaw


regards Rainer

Observatorio Real de 14
San Luis Potosi Mexico

North 22° West 101°
User avatar
rsfoto
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 6124
Joined: Mon Jun 18, 2012 8:30 pm
Location: San Luis Potosi, México
Has thanked: 9243 times
Been thanked: 5504 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by rsfoto »

Hi,

Went back to the bread boarded circuit and added a LED Bar for the visual identification while the SSM is working.

Video of 1 minute which crunches a real time video I took during 18 minutes.

https://vimeo.com/249602522

Below the circuit on the bread board
IMG_2804_C1.jpg
IMG_2804_C1.jpg (1.53 MiB) Viewed 9625 times
:seesaw


regards Rainer

Observatorio Real de 14
San Luis Potosi Mexico

North 22° West 101°
User avatar
banjo
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 1461
Joined: Sat Sep 17, 2016 12:38 pm
Location: France
Has thanked: 2070 times
Been thanked: 2833 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by banjo »

Hello,
:bow :bow

a few colors here ;) ;)

https://vimeo.com/249800318

Paul


bresser/messier 150/1200 (or 200/1800 Istar ) Mod -D-Erf 160mm intern-glasspath 1.25-etalon Pst barlow X2 ASI174
https://astropol.pagesperso-orange.fr/b ... 9/best2019
sorry for my English translators google :mrgreen:
User avatar
rsfoto
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 6124
Joined: Mon Jun 18, 2012 8:30 pm
Location: San Luis Potosi, México
Has thanked: 9243 times
Been thanked: 5504 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by rsfoto »

banjo wrote: Fri Jan 05, 2018 1:25 pm Hello,
:bow :bow

a few colors here ;) ;)

https://vimeo.com/249800318

Paul
Hi Paul,

Is that in real time and are you reading at an iteration rate of 1000 ? I am just starting and learning to program the Arduino so I still have a long way to go.


regards Rainer

Observatorio Real de 14
San Luis Potosi Mexico

North 22° West 101°
User avatar
banjo
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 1461
Joined: Sat Sep 17, 2016 12:38 pm
Location: France
Has thanked: 2070 times
Been thanked: 2833 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by banjo »

Hello,
no it's just a simulation before integration into my software, I find that the colors are more meaningful than the numbers.
blue very good
green ok
red useless
Paul

a small gift of January 5 :lol: , not very stable, the sun is low and the wind is very strong in France :mad: :mad:

Image


bresser/messier 150/1200 (or 200/1800 Istar ) Mod -D-Erf 160mm intern-glasspath 1.25-etalon Pst barlow X2 ASI174
https://astropol.pagesperso-orange.fr/b ... 9/best2019
sorry for my English translators google :mrgreen:
User avatar
rsfoto
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 6124
Joined: Mon Jun 18, 2012 8:30 pm
Location: San Luis Potosi, México
Has thanked: 9243 times
Been thanked: 5504 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by rsfoto »

banjo wrote: Sat Jan 06, 2018 10:47 am Hello,
no it's just a simulation before integration into my software, I find that the colors are more meaningful than the numbers.
blue very good
green ok
red useless
Paul

a small gift of January 5 :lol: , not very stable, the sun is low and the wind is very strong in France :mad: :mad:

Image
Thank Paul and yes you are right. My bar when many LED on is bad and few LED on good. At the beginning it is difficult to judge but with the time one gets used to it.

LED 1 and 2 I use them for signalizing Sun intensity

Led 1 Sun intensity and > 0.5 to <=1.0 then OK and ON else OFF
LED 2 blinks when Sun intensity > 1.0 abs so I know I have to adjust. It happened to me that I had to readjust because the adjustment the day before was again to high and as I see the sky today I think I have to readjust.

The little BPW34 was delivering yesterday up to 3 mA ( 3000 uA ) of current.

and then LED 3 to 10 are as following

LED 3 -----------< 1.0
LED 4 > 1.0 --- < 1.5
LED 5 > 1.5 --- < 2.0
LED 6 > 2.0 --- < 2.5
LED 7 > 2.5 --- < 3.0
LED 8 > 3.0 --- < 3.5
LED 9 > 3.5 --- < 4.0
LED 10 > 4.0 ----------


regards Rainer

Observatorio Real de 14
San Luis Potosi Mexico

North 22° West 101°
User avatar
PDB
Almost There...
Almost There...
Posts: 702
Joined: Mon Aug 15, 2016 4:23 pm
Location: Belgium
Has thanked: 2 times
Been thanked: 149 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by PDB »

banjo wrote: Fri Jan 05, 2018 1:25 pm Hello,
:bow :bow

a few colors here ;) ;)

https://vimeo.com/249800318

Paul
Excellent idea!!

immediatelly started working on my Solar Monitor again
Screenshot2018-01-06-1833.png
Screenshot2018-01-06-1833.png (70.12 KiB) Viewed 9552 times
Screenshot2018-01-06-1837.png
Screenshot2018-01-06-1837.png (103.46 KiB) Viewed 9552 times
Now still someting similar to add for input value

Regards,

Paul


User avatar
banjo
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 1461
Joined: Sat Sep 17, 2016 12:38 pm
Location: France
Has thanked: 2070 times
Been thanked: 2833 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by banjo »

Hello everyone,

Paul, that's exactly what I would like to do, bargraph input & output super.
Your software is extra !!
Is it possible to have it?

Paul


bresser/messier 150/1200 (or 200/1800 Istar ) Mod -D-Erf 160mm intern-glasspath 1.25-etalon Pst barlow X2 ASI174
https://astropol.pagesperso-orange.fr/b ... 9/best2019
sorry for my English translators google :mrgreen:
User avatar
PDB
Almost There...
Almost There...
Posts: 702
Joined: Mon Aug 15, 2016 4:23 pm
Location: Belgium
Has thanked: 2 times
Been thanked: 149 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by PDB »

Is it possible to have it?
Yes it is possible but this version is not completely ready yet ... and only Linux at the moment, although I am working on a port to Windows (would like to port it on OS/X as well, but no machine, and think my wife will throw me out if I buy yet another computer ;) )

I will let you know when it is ready and tested. The automatic trigger of video capture will (should) work wit Planetary Imager and FireCapture.

Regards,

Paul


User avatar
banjo
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 1461
Joined: Sat Sep 17, 2016 12:38 pm
Location: France
Has thanked: 2070 times
Been thanked: 2833 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by banjo »

thank you Paul,
I am with Win7 and do not know much in programming.
I'm waiting for your final version with pleasure.
Paul

Image


bresser/messier 150/1200 (or 200/1800 Istar ) Mod -D-Erf 160mm intern-glasspath 1.25-etalon Pst barlow X2 ASI174
https://astropol.pagesperso-orange.fr/b ... 9/best2019
sorry for my English translators google :mrgreen:
User avatar
PDB
Almost There...
Almost There...
Posts: 702
Joined: Mon Aug 15, 2016 4:23 pm
Location: Belgium
Has thanked: 2 times
Been thanked: 149 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by PDB »

banjo wrote: Sun Jan 07, 2018 10:07 am Hello everyone,

Paul, that's exactly what I would like to do, bargraph input & output super.
Your software is extra !!
Is it possible to have it?

Paul
Paul,

have sent you a private message about this. (A windows test version is now available)

P.


User avatar
banjo
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 1461
Joined: Sat Sep 17, 2016 12:38 pm
Location: France
Has thanked: 2070 times
Been thanked: 2833 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by banjo »

Hello everyone,
thank you for this message, sorry not to have answered before, I'll try as soon as the sun will show.
In the south of France just December 5th and January 5th really good, if not only rain and clouds.
Paul


bresser/messier 150/1200 (or 200/1800 Istar ) Mod -D-Erf 160mm intern-glasspath 1.25-etalon Pst barlow X2 ASI174
https://astropol.pagesperso-orange.fr/b ... 9/best2019
sorry for my English translators google :mrgreen:
User avatar
Merlin66
Librarian
Librarian
Posts: 3970
Joined: Tue Dec 13, 2011 1:23 pm
Location: Junortoun, Australia
Has thanked: 173 times
Been thanked: 615 times
Contact:

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by Merlin66 »

Any updates on this project?
Any changes/ improvements over the past three years?


"Astronomical Spectroscopy - The Final Frontier" - to boldly go where few amateurs have gone before
https://groups.io/g/astronomicalspectroscopy  
http://astronomicalspectroscopy.com
"Astronomical Spectroscopy for Amateurs" and
"Imaging Sunlight - using a digital spectroheliograph" - Springer
User avatar
Radon86
Almost There...
Almost There...
Posts: 779
Joined: Sat Mar 23, 2019 10:05 pm
Has thanked: 745 times
Been thanked: 660 times

DIY SSM Arduino pdf file please upload ?

Post by Radon86 »

Original file for DIY SSM - https://www.ecu.edu/cs-cas/physics/uplo ... final2.pdf
I can't find this now, can anyone please upload this, as I want to pursue this project for myself ?

Many thanks
Magnus


Solar: H-alpha": Quark Chromosphere filter; Baader white light filters
Scopes: Altair Astro Travel ED70mm (F 420mm, D=70mm);; Skywatcher 90mm (F 910mm D=90mm); GSO focuser;;Altair Astro 60mm guidescope (D=60mm,F=225mm)
Cameras: ASI120mm-S,ASI174mm
Mount: SW HEQ5 Pro, SW EQ3 Pro Synscan (SW = Skywatcher),Vixen Polarie tracker (portable setup)
Accessory: SW Auto-focuser
User avatar
PDB
Almost There...
Almost There...
Posts: 702
Joined: Mon Aug 15, 2016 4:23 pm
Location: Belgium
Has thanked: 2 times
Been thanked: 149 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by PDB »

suppose you mean this?

Never trust the cloud to keep data ;)

Paul
Attachments
An-Inexpensive-Solar-Scintillation-Seeing-Monitor-Circuit-with-Arduino-Interface-final2.pdf
(604.24 KiB) Downloaded 251 times


None of my posts or images may be shared on Facebook, Twitter or any other social media other than SolarChat without permission.
User avatar
Radon86
Almost There...
Almost There...
Posts: 779
Joined: Sat Mar 23, 2019 10:05 pm
Has thanked: 745 times
Been thanked: 660 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by Radon86 »

PDB wrote: Mon Mar 22, 2021 11:41 am suppose you mean this?

Never trust the cloud to keep data ;)

Paul
Hi Paul !

Thank you very much Paul. You saved me a lot of work and research.
Great !
Magnus


Solar: H-alpha": Quark Chromosphere filter; Baader white light filters
Scopes: Altair Astro Travel ED70mm (F 420mm, D=70mm);; Skywatcher 90mm (F 910mm D=90mm); GSO focuser;;Altair Astro 60mm guidescope (D=60mm,F=225mm)
Cameras: ASI120mm-S,ASI174mm
Mount: SW HEQ5 Pro, SW EQ3 Pro Synscan (SW = Skywatcher),Vixen Polarie tracker (portable setup)
Accessory: SW Auto-focuser
User avatar
Radon86
Almost There...
Almost There...
Posts: 779
Joined: Sat Mar 23, 2019 10:05 pm
Has thanked: 745 times
Been thanked: 660 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by Radon86 »

Merlin66 wrote: Fri Jan 22, 2021 10:23 pm Any updates on this project?
Any changes/ improvements over the past three years?
Hi All,
I am starting to tackle this project and build my own DIY SSM. Does everyone use one or would like to own one ?

I wonder what percentage of solar imagers actually use a SSM connected to FC or not connected to FC (FireCapture)?

I am thinking if someone could build it, would some of you be interested to buy it if it was a lot less expensive than the ones made by the mainstream company for 350 dollars/euros?

Thanks
Magnus


Solar: H-alpha": Quark Chromosphere filter; Baader white light filters
Scopes: Altair Astro Travel ED70mm (F 420mm, D=70mm);; Skywatcher 90mm (F 910mm D=90mm); GSO focuser;;Altair Astro 60mm guidescope (D=60mm,F=225mm)
Cameras: ASI120mm-S,ASI174mm
Mount: SW HEQ5 Pro, SW EQ3 Pro Synscan (SW = Skywatcher),Vixen Polarie tracker (portable setup)
Accessory: SW Auto-focuser
User avatar
marktownley
Librarian
Librarian
Posts: 42131
Joined: Tue Oct 18, 2011 5:27 pm
Location: Brierley Hills, UK
Has thanked: 20240 times
Been thanked: 10116 times
Contact:

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by marktownley »

I have an SSM, used to use it connected to FC, rarely use it now, just gauge the seeing by eye and experience.


Image
http://brierleyhillsolar.blogspot.co.uk/
Solar images, a collection of all the most up to date live solar data on the web, imaging & processing tutorials - please take a look!
User avatar
Radon86
Almost There...
Almost There...
Posts: 779
Joined: Sat Mar 23, 2019 10:05 pm
Has thanked: 745 times
Been thanked: 660 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by Radon86 »

marktownley wrote: Tue Apr 27, 2021 6:14 pm I have an SSM, used to use it connected to FC, rarely use it now, just gauge the seeing by eye and experience.
Thanks Mark,

That is very interesting. Sort of tallies with what I can tell from my own eyes. I am getting better with experience.
I will see if I can build one inexpensively, could be fun ?

Thanks
Magnus


Solar: H-alpha": Quark Chromosphere filter; Baader white light filters
Scopes: Altair Astro Travel ED70mm (F 420mm, D=70mm);; Skywatcher 90mm (F 910mm D=90mm); GSO focuser;;Altair Astro 60mm guidescope (D=60mm,F=225mm)
Cameras: ASI120mm-S,ASI174mm
Mount: SW HEQ5 Pro, SW EQ3 Pro Synscan (SW = Skywatcher),Vixen Polarie tracker (portable setup)
Accessory: SW Auto-focuser
User avatar
BGazing
Ohhhhhh My!
Ohhhhhh My!
Posts: 197
Joined: Mon Apr 11, 2022 6:53 pm
Has thanked: 289 times
Been thanked: 351 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by BGazing »

Welp.
A friend made me one using the sketch kindly provided...but it won't connect to the Windows program. It connects on his Windows 7, but won't on my Windows 10. What givess?
Otherwise it works with its little display...just won't connect.


Lunt 80MT DS, 533/1600/462
rpineau
The Sun?
The Sun?
Posts: 7
Joined: Tue Aug 24, 2021 10:01 pm
Has thanked: 2 times
Been thanked: 11 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by rpineau »

Depending on what Arduino (or clone) was used you might need to install the usb-serial chip drivers (FTDI, Silicon Labs, Prolific, Arduino ....).


User avatar
BGazing
Ohhhhhh My!
Ohhhhhh My!
Posts: 197
Joined: Mon Apr 11, 2022 6:53 pm
Has thanked: 289 times
Been thanked: 351 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by BGazing »

Spent around 5hrs seeking all sorts of solutions...and then reinstalled SSM out of desperation...voila. Go figure.


Lunt 80MT DS, 533/1600/462
User avatar
Bastelhannes
Ohhhhhh My!
Ohhhhhh My!
Posts: 154
Joined: Thu Jul 29, 2021 7:38 am
Has thanked: 83 times
Been thanked: 138 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by Bastelhannes »

I would like to build/use one, but I could never get me to like FC. Don't get me wrong, it is a nice program. But it's like a partner, you do not fell in love with everyone you meet in the pub (oh, what a nightmare).


My greatest fear is being married alive.
Oak
Ohhhhhh My!
Ohhhhhh My!
Posts: 142
Joined: Mon Feb 07, 2022 6:16 pm
Has thanked: 288 times
Been thanked: 232 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by Oak »

I just built one myself using an Arduino Uno R3. And now of course a week of clouds is in the forecast....


User avatar
Radon86
Almost There...
Almost There...
Posts: 779
Joined: Sat Mar 23, 2019 10:05 pm
Has thanked: 745 times
Been thanked: 660 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by Radon86 »

Hi,

Have you managed to test your new Solar scintillation monitor yet on the Sun ?

Magnus


Oak
Ohhhhhh My!
Ohhhhhh My!
Posts: 142
Joined: Mon Feb 07, 2022 6:16 pm
Has thanked: 288 times
Been thanked: 232 times

Re: DIY Solar Scintillation Seeing Monitor with FC support

Post by Oak »

Radon86 wrote: Mon Oct 03, 2022 6:39 am Hi,

Have you managed to test your new Solar scintillation monitor yet on the Sun ?

Magnus
Only very briefly and things seem to be woking - although I am not sure about accuracy yet. I also marked up the breadboard photo in the initial paper to reproduce that layout. Attaching in case it's helpful to others. The Arduino code needed some alteration to work with the Uno as well.
SSM_BreadboardLayout_Small - Copy.jpg
SSM_BreadboardLayout_Small - Copy.jpg (436.79 KiB) Viewed 1326 times
-Derek


Post Reply