Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

these are all of the great references that our users have shared with others.

Moderator: marktownley

Post Reply
User avatar
H-Alpha
Almost There...
Almost There...
Posts: 561
Joined: Sun Feb 21, 2021 2:19 am
Location: Vouliagmeni (South Athens suburbs), Greece
Has thanked: 1603 times
Been thanked: 922 times

Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by H-Alpha »

Hi all,

Although this is something discussed in the past, I could not find a satisfying answer on the best way to approach the real H-alpha colour.
I am aware that colour is a personal perception; we do not see it all in the same way, we usually do not have calibrated monitors etc. etc.

If something like the 'true H-alpha colour' exists (I hope it exists since it can be recorded by instruments and we can get measurements and absorption line in the spectrum), my practical question is what would be the best way to represent it when colourising a grayscale image of H-alpha.

For example, could we unanimously agree that playing with the RGB levels in photoshop, there are three values that produce 'true H-alpha colour'?

If such a thing does not exist objectively, then I would be happy to know what values you are using anyway in practice, when you wish to represent the H-alpha colour by RGB, or any other process you are using with an appropriate software.

Best wishes,
Alexandros

PS: There is an action in Astronomy Tools for photoshop to do what I am looking for, but the colour it gives seems far away from what we can see in H-alpha scope, I think. It is much more pink/violet than what I think is the H-alpha colour.


Alexandros
Lunt 130MT+1800BF, C8 Ultima PEC+AstroSolar, Skywatcher Mount EQ6-R Pro
Baader Solar Prism, ZEISS Abbe Barlow 2x, Celestron Barlow 2x Ultima Series
ZWO ASI290MM, ZWO ASI1600MM Pro,
Greece
User avatar
MAURITS
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 6238
Joined: Tue Nov 27, 2018 4:37 pm
Location: Belgium
Has thanked: 1241 times
Been thanked: 3130 times
Contact:

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by MAURITS »

Alexandros, I follow this post interested.


Regards,
Maurits

Vista del Cielo Observatory

www.vistadelcielo.be
User avatar
Bob Yoesle
Almost There...
Almost There...
Posts: 919
Joined: Thu Mar 08, 2012 7:24 pm
Has thanked: 308 times
Been thanked: 613 times

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by Bob Yoesle »

Hi Alexandros,

There certainly are a lot of RGB color conversion applications to achieve a realistic and valid color approximation. Here's one that is easy to use by just entering the wavelength and it gives you the corresponding RGB values.

My results for the Baader continuum filter at 540 nm:
Baader Continuum full disc.jpg
Baader Continuum full disc.jpg (194.45 KiB) Viewed 850 times

CaK emission 394 nm:
CaK full disc.jpg
CaK full disc.jpg (181.71 KiB) Viewed 850 times

H alpha emission 656 nm:
H alpha Venus transit.jpg
H alpha Venus transit.jpg (165.88 KiB) Viewed 849 times

It couldn't be easier.

Bob


Diagonally parked in a parallel universe.

Curiosity is the father of knowledge; uncertainty is the mother of wisdom.

Goldendale Observatory

Dark-Sky Defenders
User avatar
rsfoto
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 5303
Joined: Mon Jun 18, 2012 8:30 pm
Location: San Luis Potosi, México
Has thanked: 6622 times
Been thanked: 4520 times

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by rsfoto »

Hi Bob,

That is interesting. 656nm gives RGB 255,0,0


regards Rainer

Observatorio Real de 14
San Luis Potosi Mexico

North 22° West 101°
User avatar
H-Alpha
Almost There...
Almost There...
Posts: 561
Joined: Sun Feb 21, 2021 2:19 am
Location: Vouliagmeni (South Athens suburbs), Greece
Has thanked: 1603 times
Been thanked: 922 times

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by H-Alpha »

Bob Yoesle wrote: Sun Dec 11, 2022 8:47 pm Hi Alexandros,

There certainly are a lot of RGB color conversion applications to achieve a realistic and valid color approximation. Here's one that is easy to use by just entering the wavelength and it gives you the corresponding RGB values.

It couldn't be easier.

Bob
This is really great!

Thanks so much Bob!

Two remarks:

1) H-alpha could not be more red.... it is RGB 255, 0, 0 :-)

2) I observed that this algorithm makes sudden passes of colour from some precise values to the next in nm, but then keeps the same colour (RGB) for a range of the spectrum. The full red 255, 0, 0 corresponds to all wavelengths from 645 to 700.

I found some on-line applications, but would like to make the conversion in PS. How did you convert the grayscale to H-alpha (255, 0, 0) monochrome?

And excellent example photos!!!! including the precious Venus transit that we won't see again during our lives, if I am not wrong... :-(

Thanks once more!

Best wishes,
Alexandros
Last edited by H-Alpha on Sun Dec 11, 2022 10:11 pm, edited 1 time in total.


Alexandros
Lunt 130MT+1800BF, C8 Ultima PEC+AstroSolar, Skywatcher Mount EQ6-R Pro
Baader Solar Prism, ZEISS Abbe Barlow 2x, Celestron Barlow 2x Ultima Series
ZWO ASI290MM, ZWO ASI1600MM Pro,
Greece
EGRAY_OBSERVATORY
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 6845
Joined: Mon May 18, 2020 4:45 pm
Location: Essex, S.E.England
Been thanked: 4881 times

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by EGRAY_OBSERVATORY »

Of course there are also PaintShopPro programs etc, that may well do the job, as well as using Ha scopes and cameras to achieve the desired results..

Terry


User avatar
Bob Yoesle
Almost There...
Almost There...
Posts: 919
Joined: Thu Mar 08, 2012 7:24 pm
Has thanked: 308 times
Been thanked: 613 times

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by Bob Yoesle »

Hi Alexandros,

I'm not familiar with PS, as I use Paint Shop Pro instead, but the process will be essentially the same.

Here's an example greyscale image:

Image2.jpg
Image2.jpg (389.03 KiB) Viewed 799 times

In PSP I choose Colors > Split channel > Split to RGB. This will give you 3 identical greyscale R, G, and B images to manipulate.

Select the appropriate R, G, and B image and apply a change in Colors > Brightness/Contrast adjustment level to match the individual RGB brightness values (not contrast - leave that alone) to what they should be. You then will have your separate RGB adjusted images to recombine:

Image1.jpg
Image1.jpg (359.75 KiB) Viewed 799 times

Next your recombine your new R, G, and B images - Colors > Combine channel > Combine from RGB. You'll then have your selected color value image:

Image3.jpg
Image3.jpg (430.87 KiB) Viewed 799 times

Bob


Diagonally parked in a parallel universe.

Curiosity is the father of knowledge; uncertainty is the mother of wisdom.

Goldendale Observatory

Dark-Sky Defenders
User avatar
rigel123
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3424
Joined: Thu Apr 08, 2021 9:26 pm
Location: Mason, OH
Has thanked: 3671 times
Been thanked: 4129 times
Contact:

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by rigel123 »

All you need to do in Photoshop is once you open your grayscale image go to Image/Mode and select RGB. You can then use a variety of methods to make the color mix you want.


Warren

Lunt LS60T DS
Orion ED80T CF
Lunt CaK BF1200
Lunt WL Wedge
ASI174MM
Skyris 236M

https://www.astrobin.com/users/rigel123/
User avatar
robert
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 2918
Joined: Fri Oct 14, 2011 1:49 pm
Location: N.W.Scotland
Has thanked: 2 times
Been thanked: 821 times
Contact:

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by robert »

Hi Alexandros

I guess "objectively" is the problem here. Bob's images (accurate as they are, within the limits of RGB screens) show that there is a considerable loss of clarity of detail and contrast by doing this. Why would you want to do it? If the James Webb space telescope images were shown "objectively" they would be completely black for the mid infra red camera images.

This is a quick example of red only channel RGB compared to my adjusted image from 10th Dec to illustrate the losses
two images.jpg
two images.jpg (163.63 KiB) Viewed 714 times

I use the same adjustment, more or less, in photoshop for my images but don't expect anyone else to agree with my personal aesthetic choice.

I use the Mode and RGB setting as Warren mentioned, then in "image adjust" I "load" an .alv file which does most of the adjustment (B down, G down a bit, R as is) and then adjust the Red channel to make the background pure black if necessary. I also sometimes brighten the image.

mode.jpg
mode.jpg (114.55 KiB) Viewed 729 times
image adjust.jpg
image adjust.jpg (137.81 KiB) Viewed 729 times
load alv.jpg
load alv.jpg (195.14 KiB) Viewed 729 times


It is far from "objective" but I do share your idea that it is good to be consistent and use a standard adjustment for my images.

(I will attach my ha2.alv file in case you want to test it out! I tried but actually I can't attach it, but I could PM you if you want)

Robert

PS I also alter the 16 bit to 8 bit (in Mode) so that the .jpg file is usable!
Last edited by robert on Mon Dec 12, 2022 2:47 pm, edited 7 times in total.


images and animations http://tinyurl.com/h5bgoso
2022 images https://www.flickr.com/photos/69734017@ ... 0295810277
2021 images https://tinyurl.com/d7jbz3sw
ED80. ED100. SW200. Celestron-150mm-PST mod. C9.25. ES127
LS60PT-LS60F-B1200. B600-Cak. PGR-Ch3-IMX265
User avatar
H-Alpha
Almost There...
Almost There...
Posts: 561
Joined: Sun Feb 21, 2021 2:19 am
Location: Vouliagmeni (South Athens suburbs), Greece
Has thanked: 1603 times
Been thanked: 922 times

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by H-Alpha »

Hi Warren and thanks for this.
rigel123 wrote: Mon Dec 12, 2022 11:53 am All you need to do in Photoshop is once you open your grayscale image go to Image/Mode and select RGB. You can then use a variety of methods to make the color mix you want.
Can you please indicate one of the methods you use? Just to clarify that my goal is to apply the 255, 0, 0 on the grayscale photo and not to play with Levels, Curves, Selective colour, Colour balance etc. in order to achieve the colour that I like the best.

I tried the "Photo Filter" under "Image/Adjustments", but did not find it satisfying.

Best wishes,
Alexandros


Alexandros
Lunt 130MT+1800BF, C8 Ultima PEC+AstroSolar, Skywatcher Mount EQ6-R Pro
Baader Solar Prism, ZEISS Abbe Barlow 2x, Celestron Barlow 2x Ultima Series
ZWO ASI290MM, ZWO ASI1600MM Pro,
Greece
User avatar
robert
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 2918
Joined: Fri Oct 14, 2011 1:49 pm
Location: N.W.Scotland
Has thanked: 2 times
Been thanked: 821 times
Contact:

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by robert »

"my goal is to apply the 255, 0, 0 on the grayscale photo"

If you want to do this in PS you can convert to RGB and then select the "Channels" tab in the "Layers" window and go to G and B channels and fill them with black, then select RGB and have a look. This is how I did my quick example above.
Robert


images and animations http://tinyurl.com/h5bgoso
2022 images https://www.flickr.com/photos/69734017@ ... 0295810277
2021 images https://tinyurl.com/d7jbz3sw
ED80. ED100. SW200. Celestron-150mm-PST mod. C9.25. ES127
LS60PT-LS60F-B1200. B600-Cak. PGR-Ch3-IMX265
User avatar
MAURITS
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 6238
Joined: Tue Nov 27, 2018 4:37 pm
Location: Belgium
Has thanked: 1241 times
Been thanked: 3130 times
Contact:

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by MAURITS »

Thanks Bob to pointing out the colors.


Regards,
Maurits

Vista del Cielo Observatory

www.vistadelcielo.be
User avatar
H-Alpha
Almost There...
Almost There...
Posts: 561
Joined: Sun Feb 21, 2021 2:19 am
Location: Vouliagmeni (South Athens suburbs), Greece
Has thanked: 1603 times
Been thanked: 922 times

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by H-Alpha »

Thanks once more Robert for all your help and the PM regarding the .alv file! :-)

Once more our posts were crossed.
robert wrote: Mon Dec 12, 2022 2:51 pm "my goal is to apply the 255, 0, 0 on the grayscale photo"

If you want to do this in PS you can convert to RGB and then select the "Channels" tab in the "Layers" window and go to G and B channels and fill them with black, then select RGB and have a look. This is how I did my quick example above.
Robert
Yes, your idea is the solution for H-alpha. :-)
It may be applied only for only for pure RED (255, 0, 0) or pure G and B, but only for these precise monochrome situations. If you have any other idea for all monochrome colours is welcome.

For H-alpha, combining the website proposed by Bob's with your idea on RGB Channels we have the solution! :-)

Best wishes,
Alexandros


Alexandros
Lunt 130MT+1800BF, C8 Ultima PEC+AstroSolar, Skywatcher Mount EQ6-R Pro
Baader Solar Prism, ZEISS Abbe Barlow 2x, Celestron Barlow 2x Ultima Series
ZWO ASI290MM, ZWO ASI1600MM Pro,
Greece
User avatar
H-Alpha
Almost There...
Almost There...
Posts: 561
Joined: Sun Feb 21, 2021 2:19 am
Location: Vouliagmeni (South Athens suburbs), Greece
Has thanked: 1603 times
Been thanked: 922 times

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by H-Alpha »

Bob Yoesle wrote: Mon Dec 12, 2022 2:40 am Hi Alexandros,

I'm not familiar with PS, as I use Paint Shop Pro instead, but the process will be essentially the same.

Here's an example greyscale image:


Bob
Thanks a lot Bob!

Very intersecting, easy and useful menu in Paint Shop Pro! Good to know if I cannot find the equivalent action/menu in PS.

Thank you all for being so helpful!

Best wishes,
Alexandros


Alexandros
Lunt 130MT+1800BF, C8 Ultima PEC+AstroSolar, Skywatcher Mount EQ6-R Pro
Baader Solar Prism, ZEISS Abbe Barlow 2x, Celestron Barlow 2x Ultima Series
ZWO ASI290MM, ZWO ASI1600MM Pro,
Greece
User avatar
robert
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 2918
Joined: Fri Oct 14, 2011 1:49 pm
Location: N.W.Scotland
Has thanked: 2 times
Been thanked: 821 times
Contact:

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by robert »

Hi Alexandros

I use CaK .alv file but if I tried to do an "objectively" coloured image to represent the eyepiece view it would have to be all black. My eyes don't see it at all....

Good luck
Robert


images and animations http://tinyurl.com/h5bgoso
2022 images https://www.flickr.com/photos/69734017@ ... 0295810277
2021 images https://tinyurl.com/d7jbz3sw
ED80. ED100. SW200. Celestron-150mm-PST mod. C9.25. ES127
LS60PT-LS60F-B1200. B600-Cak. PGR-Ch3-IMX265
User avatar
rigel123
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3424
Joined: Thu Apr 08, 2021 9:26 pm
Location: Mason, OH
Has thanked: 3671 times
Been thanked: 4129 times
Contact:

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by rigel123 »

H-Alpha wrote: Mon Dec 12, 2022 1:05 pm Hi Warren and thanks for this.
rigel123 wrote: Mon Dec 12, 2022 11:53 am All you need to do in Photoshop is once you open your grayscale image go to Image/Mode and select RGB. You can then use a variety of methods to make the color mix you want.
Can you please indicate one of the methods you use? Just to clarify that my goal is to apply the 255, 0, 0 on the grayscale photo and not to play with Levels, Curves, Selective colour, Colour balance etc. in order to achieve the colour that I like the best.

I tried the "Photo Filter" under "Image/Adjustments", but did not find it satisfying.

Best wishes,
Alexandros
Yep, Robert gave you one of the more straight forward methods to get to a color you like. As you mentioned, you can also use an adjustment layer and play with levels on all three channels (RGB). It is a challenge to get that deep red color that you see visually and still see all of the nice details when working with an image. One thing I just thought of but haven't tried it yet is to make a deep red disk and then use a grayscale image as a layer to use as a Luminance layer like in deep sky processing.

I'll try posting this one more time, Chat has been really finicky today trying to get a post to actually post! Not sure what is up. I tried a couple of ways in PS to colorize a full disk I took on 12/4. This was the best method I found simply changing the mode to RGB and then used Color Balance and slid the Red slider all the way to the right and the G and B all the way to the left. Not too bad but I still see a loss of detail like I do anytime I colorize an image. Guess I'm a grayscale kind of guy!

Grayscale
FD-12-4-2022.jpg
FD-12-4-2022.jpg (419.16 KiB) Viewed 634 times
Colorized
FD-12-4-2022-Red.jpg
FD-12-4-2022-Red.jpg (771.1 KiB) Viewed 634 times


Warren

Lunt LS60T DS
Orion ED80T CF
Lunt CaK BF1200
Lunt WL Wedge
ASI174MM
Skyris 236M

https://www.astrobin.com/users/rigel123/
User avatar
Bob Yoesle
Almost There...
Almost There...
Posts: 919
Joined: Thu Mar 08, 2012 7:24 pm
Has thanked: 308 times
Been thanked: 613 times

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by Bob Yoesle »

Hi Warren & Robert,

With my RGB processing, I find it works best when you don't use jpg or other significantly compressed file formats.

Here's a full disc grey scale image that I had saved as a png, RGB split and combined for an Ha colored png. I then copied both, reduced the size, and then saved the comparison as a smaller jpeg. Loss of detail in the red channel image with jpg compression becomes obvious.
GS v RGB FD sm.jpg
GS v RGB FD sm.jpg (536.07 KiB) Viewed 623 times
Open in a new tab to see a larger image.


However, here's crops of the original png full disc images grey scale and RGB split/combine. There appears there's no detectable degradation or loss of detail in the red channel png vs grey scale - at least as far as I can observe.

GS v RGB.png
GS v RGB.png (353.11 KiB) Viewed 623 times

Bob
Last edited by Bob Yoesle on Tue Dec 13, 2022 3:24 pm, edited 1 time in total.


Diagonally parked in a parallel universe.

Curiosity is the father of knowledge; uncertainty is the mother of wisdom.

Goldendale Observatory

Dark-Sky Defenders
User avatar
rigel123
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3424
Joined: Thu Apr 08, 2021 9:26 pm
Location: Mason, OH
Has thanked: 3671 times
Been thanked: 4129 times
Contact:

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by rigel123 »

I think it comes down to my eyes. In both examples the colorized version is darker so I see better details in the grayscale. Interesting to see different methods and their results.


Warren

Lunt LS60T DS
Orion ED80T CF
Lunt CaK BF1200
Lunt WL Wedge
ASI174MM
Skyris 236M

https://www.astrobin.com/users/rigel123/
User avatar
H-Alpha
Almost There...
Almost There...
Posts: 561
Joined: Sun Feb 21, 2021 2:19 am
Location: Vouliagmeni (South Athens suburbs), Greece
Has thanked: 1603 times
Been thanked: 922 times

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by H-Alpha »

Thanks Warren,
rigel123 wrote: Mon Dec 12, 2022 8:45 pm
Yep, Robert gave you one of the more straight forward methods to get to a color you like. As you mentioned, you can also use an adjustment layer and play with levels on all three channels (RGB). It is a challenge to get that deep red color that you see visually and still see all of the nice details when working with an image. One thing I just thought of but haven't tried it yet is to make a deep red disk and then use a grayscale image as a layer to use as a Luminance layer like in deep sky processing.

I'll try posting this one more time, Chat has been really finicky today trying to get a post to actually post! Not sure what is up. I tried a couple of ways in PS to colorize a full disk I took on 12/4. This was the best method I found simply changing the mode to RGB and then used Color Balance and slid the Red slider all the way to the right and the G and B all the way to the left. Not too bad but I still see a loss of detail like I do anytime I colorize an image. Guess I'm a grayscale kind of guy!
I tried this method (color Balance) myself as well before writing the post. The results differ depending on the sliders you use. Only midtones? All shadows, higlights and midtones? I don't know what is the 'correct' one. What did you use in your example?

Anyway, as you say, I also have the feeling that the Red we simulate in the computer looses quite some details in comparison to grayscale and also in comparison to other false colour (like the usual golden/yellow/orange many of us use for both H-alpha and white light. Even in Bob's cropped example, my eyes perceive less detail/contrast that in his grayscale (or is it just my personal impression?). I should try one day the H-alpha with a colour camera to see what we get. But even there we have to adjust the RGB values in Firecapture, so it won't be objective H-alpha colour...

Certainly as Bob said, in all this trials we have to work on original files with no compression like .png or .tiff, if not we add one more factor of alteration of the 'objectivity' in colour.

It seems that this apparent loss of information or contrast in pure Red monochrome in comparison to Grayscale is due to our human perception of colours (the sensitivity of our eyes or the 'transcription' made by our brain).

I will try now the other method you proposed with Luminance or Colour layer to see what it gives as result.

Best wishes,
Alexandros


Alexandros
Lunt 130MT+1800BF, C8 Ultima PEC+AstroSolar, Skywatcher Mount EQ6-R Pro
Baader Solar Prism, ZEISS Abbe Barlow 2x, Celestron Barlow 2x Ultima Series
ZWO ASI290MM, ZWO ASI1600MM Pro,
Greece
User avatar
rigel123
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3424
Joined: Thu Apr 08, 2021 9:26 pm
Location: Mason, OH
Has thanked: 3671 times
Been thanked: 4129 times
Contact:

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by rigel123 »

I used the mid tone slider in my example. You could play with all three just to see what happens. I primarily stick with grayscale but every once in a while change things up with a bit of color.


Warren

Lunt LS60T DS
Orion ED80T CF
Lunt CaK BF1200
Lunt WL Wedge
ASI174MM
Skyris 236M

https://www.astrobin.com/users/rigel123/
User avatar
robert
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 2918
Joined: Fri Oct 14, 2011 1:49 pm
Location: N.W.Scotland
Has thanked: 2 times
Been thanked: 821 times
Contact:

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by robert »

I have done an adjustment using the .alv file that I use, on Bob's image (apologies Bob) to compare the three versions. I actually prefer the deep red image and the grey shows lots of detail more easily than that but the adjusted image in straw colour shows the detail with apparent increased contrast more easily and could be more beautiful than the plain grey to some people.

I take the point of jpg losses compared to png but disk space and upload speed are factors for me as well. I use .tif and .psd files for the processing stages before storing or posting images.

More to ponder!

Robert
GS v RGB v false colour copy.png
GS v RGB v false colour copy.png (680.11 KiB) Viewed 538 times
Last edited by robert on Wed Dec 14, 2022 2:21 pm, edited 1 time in total.


images and animations http://tinyurl.com/h5bgoso
2022 images https://www.flickr.com/photos/69734017@ ... 0295810277
2021 images https://tinyurl.com/d7jbz3sw
ED80. ED100. SW200. Celestron-150mm-PST mod. C9.25. ES127
LS60PT-LS60F-B1200. B600-Cak. PGR-Ch3-IMX265
User avatar
rigel123
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3424
Joined: Thu Apr 08, 2021 9:26 pm
Location: Mason, OH
Has thanked: 3671 times
Been thanked: 4129 times
Contact:

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by rigel123 »

When I did my adjustments I worked on the TIF version, but of course converted it into a jpg for posting.


Warren

Lunt LS60T DS
Orion ED80T CF
Lunt CaK BF1200
Lunt WL Wedge
ASI174MM
Skyris 236M

https://www.astrobin.com/users/rigel123/
User avatar
robert
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 2918
Joined: Fri Oct 14, 2011 1:49 pm
Location: N.W.Scotland
Has thanked: 2 times
Been thanked: 821 times
Contact:

Re: Is it possible to false colourize a grayscale H-alpha photo objectively in RGB?

Post by robert »

Hi Alexandros
I have tried to extract what the .alv file that I use actually does, just in case it is of use. It opens the R, G and B channels in "image adjust" and alters the value in the middle box for R to 1.2 approx, G to 0.5 approx and B to 0.1.
Robert
adj all copy.jpg
adj all copy.jpg (171.94 KiB) Viewed 533 times


images and animations http://tinyurl.com/h5bgoso
2022 images https://www.flickr.com/photos/69734017@ ... 0295810277
2021 images https://tinyurl.com/d7jbz3sw
ED80. ED100. SW200. Celestron-150mm-PST mod. C9.25. ES127
LS60PT-LS60F-B1200. B600-Cak. PGR-Ch3-IMX265
Post Reply